Roger Dellar edition Martlet 10×12 (made to order)

229 USD

Pochade box with wet panel carrier for large panels with removable palette, mounting on a photo tripod.

The side panel inserting for the 10×12 model will give you the opportunity to insert 10″ panels into it: 10×12, 10×10, 10×8, etc.
The front panel inserting is for 12×10, 12×9, 12×8, 12×6, etc., for a 12″ wide panel.

Tripod choosing guide: https://martletpochades.com/2023/05/16/tripod-for-pochade-box/

Stain color guide: https://martletpochades.com/stain-colour-guide/

SKU: N/A Category: Tag:

Description

This box has two slots wet panel carrier for 10×12 inch panel sizes and a removable palette.
Panels can be locked with top and bottom clamps. The bottom clamp could be removed to mount bigger panel.

The lid is held by four small tension hinges. The side opposite to the entrance of the carrier has an opening to ease the extraction of panels.

The side panel inserting will give the opportunity to insert 10″ panels into it: 10×12, 10×10, 10×8, etc. Default entrance side is left.
The front panel inserting is for 12×10, 12×9, 12×8, 12×6, etc., for a 12″ wide panel.

The easel is mounting on a standard photo tripod. For this box you should use a tripod with maximum load 12+ kg, like Zomei Q666.

WARNING! THE TRIPOD IS NOT INCLUDED! YOU WILL HAVE THE EASEL ONLY.

Dimensions:
13×11,5×3,5 inches / 33x29x9 cm

Weight: 4 lb / 1.8 kg

Maximum panel size for mounting on the easel: 17 inches
Maximum thickness of the panel to be stored in the wet panel carrier: 6 mm

The hinges allow to work at any desired angle.
Side extensions are NOT included in the standard complement.

The box is made of stained birch plywood and finished with varnish suitable for outdoor use.

Additional information

Weight 2,5 kg
Dimensions 36 × 33 × 10 cm

Reviews

There are no reviews yet.

Be the first to review “Roger Dellar edition Martlet 10×12 (made to order)”

Your email address will not be published. Required fields are marked *

You may also like…