Roger Dellar Edition Martlet 10x12 - front wet panel carrier (made to order)

This box has two slots wet panel carrier for 10×12 inch panel sizes and a removable palette. Panels can be locked with top and bottom clamps. The bottom clamp could be removed to mount a bigger panel.

The lid is held by four small tension hinges. The side opposite to the entrance of the carrier has an opening to ease the extraction of panels.

The front panel inserting is for 12×10, 12×9, 12×8, 12×6, etc., for a 12″ wide panel.

The easel is mounting on a standard photo tripod. For this box you should use a tripod with maximum load 12+ kg, like Zomei Q666.

WARNING! THE TRIPOD IS NOT INCLUDED! YOU WILL HAVE THE EASEL ONLY.

Dimensions:
13×11,5×3,5 inches / 33x29x9 cm

Weight: 4 lb / 1.8 kg

Maximum panel size for mounting on the easel: 17 inches
Maximum thickness of the panel to be stored in the wet panel carrier: 6 mm

Complement: a pochade box and a thinner cup hook. If you want a dipper cup holder instead, just make an order note.

The box is made of stained birch plywood and finished with varnish suitable for outdoor use.